Header Ads Widget

Responsive Advertisement

Component Cables No Sound

Component Cables No Sound. I am using the composite (red,white, and yellow) cables that came with the system if that is of any importantance. (with the hdmi cable, no sound.

6FT Component Video Cable with Audio 5 RCA Red Green Blue
6FT Component Video Cable with Audio 5 RCA Red Green Blue from www.walmart.com

The scart will also carry audio, where's the component is video only, so you'll need to run a stereo pair of cables from the player to tv, or a digital cable from the player to an amp of. When i do a hard reboot of the directv box, the sound comes back on fine. I don’t know what setup you got, but just because you don’t have an optical cable you are not forced to use the 3 a/v cables.

It Is Usually Of Very High Quality And Should Be Like That For The Signal To Be Of High Quality.


Show activity on this post. But yes, you do need the regular cables in the regular av port to get sound. If your hdtv has an audio input, you might be able to connect a separate audio cable from your computer sound card directly to the tv.

Usually The First Thing I Do Was To Connect A Speaker At The Output Jack To See If The Sound Really Not Present.


Then i get sound, but no picture. Audio cable shielding is a metal shielding that protects (or shields) the core wires inside the cable which transmit the original sound. Check all wires to ensure they are firmly connected, including any coaxial cable.

This Is Completely Optional, As The Cables Will Output Mono Sound To Both Speakers On Those Consoles By Default.


Coreyneyrinck, make sure that you have your ps3 set to composite cables, not component cables. Whether it’s your tv, your receiver, or both devices that don’t have hdmi connections available, you can use an rca cable and/or a converter to connect the two. It can be combined with video rca like component to achieve both hd video and audio transfer.

Further, I Have Disconnected The Directv Box And Hooked Up A Ps3 And Get The Exact Same Issue.


1) can you go from hdmi to component? That is, how much blue and red there is relative to the black & white picture (luma). It upgrades the cable's audio output to stereo.

The Device's Red Power Light Comes On And There's No Indication Of Problems, But All I Get Is Audio From My Laptop.


Component cables use the red and white audio connectors, but they divide the video into three components: The colours don't matter for those that miss the smiley at the end abbub's post, and are only there to prevent confusion. There are three methods for removing usb (and hdmi) cable noise.

Post a Comment

0 Comments